Palmer Used Equipment

Equipment

Image

Description

Has been cleaned and painted
New controls with VFDs
Smart relay with timers
4-force output settings
Can be configured to operate at any capacity as low as 1,000 lbs. up to 40,000 lbs.
9'6'' Wide x 8'8'' Long x 52" Tall
Model Number: HDCT120-10
Serial Number: C8298-1
Capacity: 40,000 lbs.
Manuals: None
Time to Ship: 1-2 weeks

Accurate Powder Feeder

Stainless Steel feeder with hopper
120 Volt
Built In Controls

1,000 Pound Capacity
Perpendicular Conveyors
Includes Controls
Daylight is 16 -16-1/2"

Shuttle Car
All Components Included

Capacity: 5 ft.3

Lab size
Includes stand, motor starter, controls, and cover
Model Number: N/A
Serial Number: E-81239
Capacity: 100 lbs.
Manuals: None
Time to Ship: 1-2 days

LOCATION: Cleveland

900 lb capacity includes control panel - contactor type New in 1993 - good condition - was operating when removed from service. All elements are included. Includes complete drawings and manuals price as is where is

Opening is 27” in diameter and 36” deep.
Smallest outside measurement is approximately 57”.

Natural gas
Palmer Part: #008981
New in box
Model Number: 203
Capacity: 52,000 BTU
Voltage: 120 V
Manuals: Yes
Time to Ship: 1-2 weeks

No Controls
No Manuals

Manufacturer - Tennsmith
Model Number - T-52
Capacity - 16 Gauge 

Hot oil jacketed
Serial Number: 0697-1070-A & B
Capacity: 7.5 HP
New

Brand New Never Used
6 Standard Outlet Positions
Standard Shaft Motor
Direct Drive Arrangement
Heavy Duty 3/16" Welded Steel Housing and Motor Support
High Efficiency Wheel and Housing Design
Radial Bladed Aluminum Impeller
Cork Mounting Pads

Manufacturer - Merrifield Company
Voltage - 50/60 HZ
Rotary Style With Short Paddle Probes
Most Universal of all Level Sensing Technologies
Most Popular Level Switch Used In Dry Bulk Materials
Internal Mechanical and Electrical Have Been Rebuilt and are in Like New but Used Condition
4 Available 

460Volt/3Ph
Controls NOT Included

Model Number - K2-MV-T35
Feeder Type - Twin Screw Design 1.5" Diameter x 5" Long Screws, Driven by .5 hp dc Motor with Controls
Application/Operation - Metering
Flow Control - Volumetric
Volumetric Capacity - 11.76 ft3/hr (5.56 L/min)
Stainless Steel Construction

Model Number 54AVS16 Style II
Capacity - 800 CFM
Voltage - 120VAC/1/60Hz
107.4 Sq. ft. of Media With an Air to Media ratio of 7.5:1 @ 800CFM
Filter Stressed for 17" WC (1.25Hg) Vacuum
Carbon Steel Construction
18"x30" Hinged T-Handle Style Housing Access Door
Man Supportable 4x4 Mesh Grate
Stainless Steel Bag Clamps
Manufacturer - Schenck
No Manuals Included
No Controls Included

Capacity - 100 PSIG 100 Degrees Fahrenheit
Voltage - 120v\1PH\60Hz
Filtration - PPF-360
Model Number - 265CDA
Dimensions - 97x57x37
Weight - 1100lbs

Voltage 480
5hp Motor
Controls not Included
Manuals not Included

Manufacturer Viridis3D
ABB Robot
Capacity 4000 lb
Voltage 480
28" Wide Print
Sand Hopper
Powder Feeder
Stand to Support Hopper and Powder Feeder
Build Speed up to 3 Vertical Inch's per Hour
Manuals Included
Controls Included

Minimum opening: 36"
Maximum opening: 59"
Hydraulically Powered
Reworked
Capacity: 3,000 lbs.

Where is/as is
With starter based control panel
Capacity: 500 lbs./min.

500 Pound/Minute
480V/3Ph/60Hz
As Is, Where Is

Used Dependable Fordath Sand Heater
460V/3Phase
No Controls
Manual NOT Included

Used Dependable Fordath Sand Heater
460 Volt/3Phase
No Controls

Used Kloster Cooler Classifier
480Volt/3Ph/60Hz
Controls Included

6" Diameter Casing
12' Discharge Height
Approximately 3 ft.2 footprint
Two thrust bearings with standard seals
Carbon steel screw and intake scoops
Quiet with few moving parts
Capacity: Up to 15 TPH
Voltage: 480 V/3 phase
Time to Ship: 1-2 weeks

Wet or Dry Belt Sander
Can be used with included water flood systems or dry
Ideal for ferrous or non-ferrous
Model Number: CAT CSE040805SQD13
Capacity: 9"
Manuals: None
Time to Ship: 1-2 days

Like new
Counterweight style feed
Model Number: EF-1495
Serial Number: 05171EF
Capacity: 12"
Manuals: Yes
Time to Ship: 1-2 days

Used Tranter Superchanger Plate Heat Exchanger
Model No. UX-216-SP-50
Surface Area: 193.7 Sq. Ft.
Pressure tested at 90psi for 1 hour
Rated 170 psi at 200 f
4" Inlet/outlets

For cores and molds from 5-200 lbs.
Rugged - Heavy-duty construction
High frequency vertical vibration
Adjustable duration timer - .1 to 10 seconds
Adjustable force
"Hands free” actuation
Precision-ground top plate
Can also be used to remove hard-to-draw cores
Ideal for small cores and molds. Great for plaques and high tolerance cores. We have two new units available.

Tilting shelves lift up and out of the way for ergonomic loading and unloading
Eliminates typical "dead" areas of rack as all shelves are easily accessible
Fingertip force required to lift shelves
Reinforced base is designed for fork truck handling
Adjustable shelf height ideal for varying core production in today's typical jobbing foundry
Large casters for ease of movement
Locking bar prevents accidental dropping of shelves

Manufacturer - Palmer Mfg.
Model Number - P5
Manuals Included - No

Recirculating I, II and III
Four Recipes
By-Pass around Flow Meter
Filter System with 100 Mesh Filter Baskets (Parts I, II Temperature Monitoring)
Additional Filter Housing and Basket Part I
Replace Part III Filter with 37 Micron Screen
Part I Resin Heater
Flow Switch Heater
In Running Condition

Fuse Box, Panel, and Stand
120 Volt
Manual NOT Included 

Used Palmer M2500XL High Speed Continuous Mixer with (2) Electric Sand Heaters
LARGEST MIXER IN NORTH AMERICA
Sand Flow Rate of 1500-4000 Pounds Per Minute
100 HP 480 Volt Drive with VFD
10' Discharge Height with 24' Reach as per attached drawings #M2500-Q-104
Dual Hydraulic Power Articulation
3 Part Mass Flow Meter Pumping System
Set Up for 3-Part Phenolic Urethane No Bake
Includes Powder Feeder
Complete with Controls
Running When Removed from Service
Includes (1) Palmer H1500 Electric Sand Heater
Includes (1) Castec 1000 Electric Sand Heater
Price is As-is, Where-is - Customer is welcome and encouraged to come inspect the machine in its current condition

Used Palmer M2500XL High Speed Continuous Mixer with (2) Electric Sand Heaters

LARGEST MIXER IN NORTH AMERICA

Sand Flow Rate of 1500-4000 Pounds Per Minute
100 HP 480 Volt Drive with VFD
10' Discharge Height with 24' Reach
Dual Hydraulic Power Articulation
3 Part Mass Flow Meter Pumping System
Set Up for 3-Part Phenolic Urethane No Bake
Includes Powder Feeder
Complete with Controls
Running When Removed from Service
Includes (1) Palmer H1500 Electric Sand Heater
Includes (1) Castec 1000 Electric Sand Heater
As described above with the following estimated rework
Labor and Materials to Replace Mixer Blades

Labor and Materials to replace Main Mixer Shaft Bearings

Labor and Materials to replace Arm Sand Conveyor Belt

Labor and Materials to Rebuild 3 Pumps

Up to Another $15,000.00 Cost to Palmer for additional Parts Found Necessary During Evaluation/Inspection/Rebuild

Up to (240) Man Hours for Set-Up, Inspection, Evaluation, Troubleshoot, Replace Additional Parts as Noted Above, Tear-Down and Prep for Shipment

Estimate Only - Actual to be Charged at Completion of Work

Not Included: Set-Up, Inspection, Evaluation, or Connecting to Utilities of Electric Sand Heaters - They can be Evaluated at additional Cost as Desired at Standard Time/Material Rates

Voltage 480
Controls Included

Model Number - M50
Serial Number - M170
Voltage - 480V
Controls are not included.

Air Operated, Infinitely Variable, Double Diaphragm Pump
1 Hp Air Motor for Agitation
Stainless Steel Propellers and Shaft
Adjustable Volume Spray Gun
In Running Condition

Used Manual Mold Handler

No Power - Uses Acme Thread to Clamp/Unclamp

H100 20Kw Electric Sand Heater

Pass thru style
No summer by-pass

3' Square Deck Area
1,500 Pound Deck Load
Dual Vibrators
Primary, Secondary and Tertiary Screens Included
Standard Voltage - 480 Volt / 3 Phase / 60 Hz
Controls / Motor Starters Not Included
5% In-Stock Discount Price $45,175.00
2 Units in Stock
Web link: http://www.palmermfg.com/shakeout_reclaimation_knockout/sdam.htm

4' Square Deck Area
2,500 Pound Deck Load
Dual Vibrators
Primary, Secondary and Tertiary Screens Included
Standard Voltage - 480 Volt / 3 Phase / 60 Hz
Controls / Motor Starters Not Included
Web link: CLICK HERE

5' Square Deck Area
3,000 Pound Deck Load
Dual Vibrators
Primary, Secondary and Tertiary Screens Included
Standard Voltage - 480 Volt / 3 Phase / 60 Hz
Controls / Motor Starters Not Included

1500 Pound Maximum Capacity
Lift Bar Top Assembly with Gravity Roller Conveyor
Rugged-Heavy Duty Construction
High Frequency Vertical Vibration
Adjustable Force from 0% to 100%
Adjustable Duration (0.1 - 10 Seconds)
Standard Voltage - 480 Volt / 3 Phase / 60Hz
Industrial Duty Airbags Provide Lifting Force and Vibration Isolation

Used Palmer RSCL-10 Classifier

10 TPH
480V/3Ph/60Hz
Controls Included

Manufacturer - Merrifield Company
Voltage - 50/60 HZ
Rotary Style With Short Paddle Probes
Most Universal of all Level Sensing Technologies
Most Popular Level Switch Used In Dry Bulk Materials
Internal Mechanical and Electrical Have Been Rebuilt and are in Like New but Used Condition
4 Available