General Description
The FCS is designed for use with all flow-coating applications. The FCS combines the rugged durability expected from Palmer equipment with the productivity dictated by today’s advanced molding systems. With automatic PLC controls available, the FCS Flow-Coating System can easily integrate into your existing molding conveyor system.
Order Of Operations
- Roll mold in and center
- Initiate primary clamping
- Verify clamp pressure
- Tilt to operator wash application point
- Await operator input of completion
- Tilt to home
- Eject mold
Custom sizes are available upon request. We can easily custom produce to meet your exact application requirements.
-
Tilting Flow-Coating Machine
-
Tilting Flow-Coating Machine
-
Tilting Flow-Coating Machine
Features
- Heavy-channel steel construction ensures years of trouble-free operation without flexure of the tilting frame.
- High load tapered roller bearings are standard on the primary pivot point for increased load capacity.
- Four-inch diameter appendage guide rollers ensure that the clamping assembly remains rigid.
- Full hydraulic operation provides for a robust power system, requiring minimal maintenance. Tilting is accomplished with dual six-inch bore heavy-duty series hydraulic cylinders. Clamping is achieved with a single six-inch bore cylinder, and push-off with a single four-inch bore cylinder.
- Design features heavy-duty “Palmerveyor” for long life, easy service, and minimal preventative maintenance.
- Dual heavy-duty clamping jaws ensure that molds are secure prior to tilting.
- Operator safety cage protects workers from potential hazards and gives them a sense of security during operation.
- High volume diaphragm pump provides maximum pump life and requires little preventative maintenance.
- Wash basin constructed of 3/16” steel reinforced for durability. Basin and construction material can be customized to fit the application’s exact needs.
FCS-T Models
Standard Sizes
Nominal Mold Size
FCS-T-1000
36X48X12
FCS-T-4000
48X60X24
FCS-T-6000
60X60X24