General
Description
The FCS is designed for use with all
flow-coating applications. The FCS combines the rugged durability expected
from Palmer equipment with the productivity dictated by today’s advanced
molding systems. With automatic PLC controls available, the FCS.
Features
- Heavy steel fabrication ensures years of
trouble-free operation without flexure or twisting of the primary
frame.
- Rotation is accomplished with a
heavy-duty hydraulic motor direct mounted to a high reduction gear box
for smooth, speed controlled operation. Dual speed rotation is
standard.
- Large diameter, dual bearing supports
ensure total support of the rotating frame.
- Four-inch diameter clamp assembly guide
rollers ensure that it does not flex.
- Full hydraulic clamping provides durable
motion parts requiring minimal maintenance. Clamping is accomplished
with dual five-inch bore heavy-duty series hydraulic cylinders.
- Design features heavy duty “Palmerveyor”
for long life, easy service, and minimal preventative maintenance.
- Dual heavy-duty clamping jaws ensure
that molds are secure prior to tilting.
- High volume diaphragm pump provides
maximum pump life and requires little preventative maintenance.
- Wash basin constructed of 3/16” steel
reinforced for durability. Basin and construction material can be
customized to fit the application’s exact needs.
Order Of Operations
- Roll mold in and center
- Initiate primary clamping
- Verify clamp pressure
- Roll to operator wash application point
- Await operator input of completion
- Roll to drip position
- Wait for drip timer
- Roll to home
- Eject mold
Standard Sizes |
Nominal Mold Size |
FCS-R-1000 |
36X48X12 |
FCS-R-4000 |
48X60X24 |
FCS-R-6000 |
60X60X24 |
FCS-R-10000 |
72X72X36 |
FCS-R-15000 |
84X84X36 |
|
 |
Resource Center |
Video |
Palmer FCS-R Flow Coater |




|
Custom sizes are available upon request to meet your exact
application requirements. |